•  
• Bearing model
• Model
  51100 V/HR11Q1
• internal diameter-(mm)
• d
  10
• Outer diameter -(mm)
• D
  24
• Bearing thickness-(mm)
• B
  9
• Dynamic load-(kN)
• cr
  0.25
• Static load-(kN)
• cor
  0.2
• Limit speed-(r/min)
• Limit speed
  600

51100 V/HR11Q1 Purpose of thrust ball bearing: it is only applicable to the parts bearing one side of axial load and low speed, such as crane hook, vertical water pump, vertical centrifuge, jack, low speed reducer, etc. The shaft ring, seat ring and rolling element of the bearing are separated and can be installed and removed separately。